LCGB Forums

Any opinions on the use of a 50mm gori race pipe for small block mugello
Cheers.

i had a gori 50mm on my mugello 198 small block with a 26mm delly ! prob a bit to big for a small block .....not much back pressure but it ran ok and there not as noisey as people say they are! lovely made pipe but the jl3 out performed it hands down!

Rexton,thats the set up I am going to use,so would you say the Gori or an Ancilotti?I want to have a standardish looking one,not an expansion type,am just un sure about which one as this is the first Scoot I have had.Li 125 1964.

am no expert its just my experience with the gori,i also had a ancillotti on a imola didnt match whats so ever, sold it to a mate with a mugello 186 and he loved it ! both brilliant pipes i think!!cannot go wrong with the pair of them! 50mm a little big for a small block but people do use them with good results! good luck!

dave411 wrote:Rexton,thats the set up I am going to use,so would you say the Gori or an Ancilotti?I want to have a standardish looking one,not an expansion type,am just un sure about which one as this is the first Scoot I have had.Li 125 1964.

I'd say you're probably better off with an 42mm AF Rayspeed Clubman. Good value for money at about a hundred quid and similar performance to the Ancillotti so I've been led to believe. I think the Gori is 50mm, that's really designed for a bigger set up.

so would you recommend putting the 50m gori on my ts1 and putting the jl3 on my mugello small block..?

sounds gud to me! av u seen the mb clubman???