LCGB Forums

I'm putting a 5 plate Reedspeed clutch kit in my next build and was going to use the rack and pinion out of an AF/Uni easy clutch but with a standard lever...
Ive got the AF kit on the shelf

Anyone done this?

My thoughts were the AF rack and pinion can only help the whole action.

Alternative is the Crimez but that's another expense and is the actual 2 piece mechanism any different, both fit in GP side casing and do the same job?

I've got the reedspeed 5 red plates in mine, its soft, softer than my other two that have 4 red plates

gaz_powell wrote:I'm putting a 5 plate Reedspeed clutch kit in my next build and was going to use the rack and pinion out of an AF/Uni easy clutch but with a standard lever...
Ive got the AF kit on the shelf

Anyone done this?

My thoughts were the AF rack and pinion can only help the whole action.

Alternative is the Crimez but that's another expense and is the actual 2 piece mechanism any different, both fit in GP side casing and do the same job?

Gaz
my GP had this exact setup your aiming 4 last year & worked a treat m8
std clutch case arm & std type lever
i only swapped for a 6 plate setup when fitted the 5 speed box

Ta