TS1 Timing
Posted: Mon Nov 11, 2019 4:06 pmWhat are the current thoughts on timing for a TS1 , no advance / retard mechanisms fitted just std stator ,flywheel and CDI ?
LCGB Forums
The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com
https://ilambretta.co.uk/forum/
TS1 Timing
Page 1 of 1
Posted: Mon Nov 11, 2019 4:06 pmRe: TS1 Timing
Posted: Mon Nov 11, 2019 5:47 pmI had mine at 19 degrees BTDC after successfully holing a few pistons when it was at 17. Definitely no higher than 19
Re: TS1 Timing
Posted: Mon Nov 11, 2019 7:51 pmnickw wrote:I had mine at 19 degrees BTDC after successfully holing a few pistons when it was at 17. Definitely no higher than 19
If you were holing pistons at 17 deg then it's more likely you will hole more if set to 19deg!
There is no definitive answer here because of the numerous other variables involved.