Page 1 of 1
which carburetta?
Posted:
Wed Mar 07, 2018 7:56 pmby WOO
Can anyone help please with carb choice for my restoration
With a 175 conversion (with an iron head) of a 1960 series 2 LI125
which carb would be the best to use
is the jetex s100 22mm any good
Re: which carburetta?
Posted:
Wed Mar 07, 2018 9:37 pmby Watfordwhite
I have a 28mm Deli on mine, but it has been heaverly tuned. Runs great.
Re: which carburetta?
Posted:
Wed Mar 07, 2018 9:57 pmby ToBoldlyGo
I'd go for a 20mm carb personally. Perfect for a 175 top end. Probably finish it off with a standard exhaust.
Re: which carburetta?
Posted:
Wed Mar 07, 2018 11:30 pmby Meds
I can only give my personal experienc of Jetex carbs.
I have always has trouble with them.
There are many on here who can get them to work fine, I never could.
The scootopia 22mil carb is suppose to be quite good, but never used them.
Re: which carburetta?
Posted:
Thu Mar 08, 2018 10:02 amby WOO
thanks meds, which one do you use?
Re: which carburetta?
Posted:
Thu Mar 08, 2018 10:33 amby kennystag
Hi WOO,
scootopia 22 mm carburettor, Ebay item number 152933890808 or any ware else, I have not had any problems with the 22 mm scootopia carb.
Cheers
Stag
Re: which carburetta?
Posted:
Thu Mar 08, 2018 10:37 amby kennystag
Woo I forgot to say I have the same set up as you have with the 175 top end on my GP 150.
Cheers
Stag
Re: which carburetta?
Posted:
Thu Mar 08, 2018 2:31 pmby WOO
cheers, will have to get a scootopia carb,
Re: which carburetta?
Posted:
Thu Mar 08, 2018 4:15 pmby HxPaul
WOO wrote:cheers, will have to get a scootopia carb,
viewtopic.php?f=6&t=7900&p=77252&hilit=float#p77252 10 posts down
Re: which carburetta?
Posted:
Sat Mar 10, 2018 4:48 pmby HxPaul
Fitted a genuine dellorto float.From seam to seam its 1/2mm thinner than the scootopia float,side to side and back to front.
Re: which carburetta?
Posted:
Sun Mar 11, 2018 9:07 amby Meds
I’m using dell or to PHBH 28 and a 30.