Page 1 of 1

Engine advice....please

PostPosted: Fri Jul 18, 2014 10:03 am
by Alex_amd2001
Hi Everybody,

I'm 95% finished my resto project (li150 series 2 winter model), but having issues with starting and idle especially with the airhose connected (does better open). Everything is standard except the new carb, dellorto PHBL 25. Can anybody offer some jetting recommendations etc. Many thanks! Alex


AQ266 atomiser
102 main jet
40 slide
60 Choke
200 Float Needle Valve
50 pilot

Re: Engine advice....please

PostPosted: Sun Jul 20, 2014 6:18 pm
by Wack
The only advice I can give is remove the baffle in the airbox neck and the wall in the air scoop , presuming they have them? This will allow more air to the carb. Check choke plunger is lifting when turned on and a 50 idle jet may be too big.

Re: Engine advice....please

PostPosted: Sun Jul 20, 2014 8:44 pm
by Alex_amd2001
Thanks Wack,

I'm going to try a 45 idle and maybe a remote filter. Appreciate the advice.

Re: Engine advice....please

PostPosted: Mon Jul 21, 2014 4:52 pm
by GeneM
id drop to a 264 or even 262 atomizer

Re: Engine advice....please

PostPosted: Mon Jul 21, 2014 5:42 pm
by Wack
Agree re the atomiser but better to get the bike starting and idling first then work from there. :)