LCGB Forums

Would anyone have some good pics on running the wiring loom on an early series 3 Li. Sticky's isn't not very clear in my opinion.

Eyeguy

Try here

http://lambrettarestorations.blogspot.c ... date=false

Thank you. Don't know why I couldn't find that.
Where would you hook the earth wire for the tail light. I've heard different ways?

Thanks
Eyeguy

eyeguy wrote:Thank you. Don't know why I couldn't find that.
Where would you hook the earth wire for the tail light. I've heard different ways?

Thanks
Eyeguy

Depends how confident you are on earthing the frame and earthing the rear light to the frame.... personally I run an earth wire from the rear light unit to the earth on the regulator....

I think that's what the original would have been. I will run to the regulator.
Thanks again

Originally it's likely that the rear light unit earth went under one of the nuts that hold the unit on. This usually means scraping a bit of the paint off to secure a good earth.

My rear light earth.

And if you're going for concourse you can bet that's right ^