I have two torque wrenches at present 3/8"sq & 1/2"sq drive that cover all the higher torque settings needed for a Lambretta ,Im looking for a 1/4" sq drive to cover the lower settings, any recommendations please.
TIA
LCGB Forums
The ability to post messages is restricted to LCGB members. Any questions contact us at lcgbadmin@googlemail.com
torque wrench.
9 posts
• Page 1 of 1
torque wrench.
by martyn dwane » Fri Aug 16, 2024 11:41 am
- martyn dwane
- Posts: 391
- Joined: Tue Jun 03, 2014 10:06 pm
Re: torque wrench.
by Cgt75b » Sat Aug 17, 2024 6:12 am
+ Tool station Machine mart, Screwfix others are available.
- Cgt75b
- Posts: 456
- Joined: Mon Jul 28, 2014 9:42 pm
- Location: Cheshire
Re: torque wrench.
by bookertmgs1 » Mon Aug 19, 2024 3:16 pm
+3 for Halfords
With a 3/8th & 1/2" - you should be covered anyway.
For anything below that you should be able to guage with your hand - it just needs to be tight - not swinging off a 5' extention bar tight.
With a 3/8th & 1/2" - you should be covered anyway.
For anything below that you should be able to guage with your hand - it just needs to be tight - not swinging off a 5' extention bar tight.
- bookertmgs1
- Posts: 256
- Joined: Thu Nov 12, 2015 10:28 pm
Re: torque wrench.
by Leotech » Wed Aug 28, 2024 9:43 am
I use one for a bicycle, The kits are relatively cheap and come with a selection of Allen key and torx bits.
https://planetx.co.uk/products/jobswort ... wrench-set
https://planetx.co.uk/products/jobswort ... wrench-set
-
Leotech - Posts: 253
- Joined: Wed Jan 13, 2016 7:15 pm
9 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 20 guests