LCGB Forums

Anybody got any idea where I can obtain a wheel rim stud from for an Indian rim. Unforntunately I have one stripped on my SIL Gp150 ( that is the stud that holds the rim halves together) Scooter restorations are out of stock.
Jono

Jono. I got some a few weeks ago from Allstyles (The ones that need welding)

Tony

Thanks Tony
Was hoping to avoid welding if possible. However, I will have a look at Allstyles as a fall back contingency should an alternative not be identified. Jono

Hi I got some from Gary at Allstyles, you can get away without welding them, you can edge pot them as long as you do them up tight no problem

Jono wrote:Anybody got any idea where I can obtain a wheel rim stud from for an Indian rim. Unforntunately I have one stripped on my SIL Gp150 ( that is the stud that holds the rim halves together) Scooter restorations are out of stock.
Jono

Just use an ordinary bolt the same size and thread,then put a nyloc nut on and tighten with spanners.